The complete Sanitary Hose Line, ReSeal Couplings allow the hose ends to be reused and to recover 70% - 80% of the initial cost of the hose at the time the hose needs to be replaced. We offer a wide range of materials and sizes and have a large inventory. 3A, FDA, USDA and PMO approved.    ReSeal   PermaSeal   SaniGard   PureGard   ClearGard     Accepted by - USDA Dairy, Egg, Meat & Poultry, Canada Agriculture Dairy, Meat & Poultry Reviewed by - Milk Safety Branch and in compliance with Grade "A" Pasteurized Milk Ordinance/FDA University Tested - Verified ReSeal#174; Assemblies are Totally Sanitary ReSeal® couplers designed exclusively for SaniGard® and ClearGard® hoses have all the features you require in a sanitary hose and coupler assembly   Sanitary - full flow compression seal prevents bacteria build-up CIP' suitable - no disassembly for cleaning like clamped-in fittings Safe - superior coupling retention, no straps or bands to injure workers But ReSeal® has one additional feature that no other sanitary coupler can match... they are totally reusable! That's right. With ReSeal® couplers, when your sanitary hose assembly gets kinked, damaged, or simply wears out, the couplers can be dismounted and reattached to a new length of SaniGard® or ClearGard® hose by a factory authorized distributor. You still have to buy a new length of hose...but you don't have to buy new couplers! That can be a savings of up to 90% over the cost of a completely new assembly! ReSeal® couplers are available in sizes ½" through 4" in a wide range of end styles. Stems are manufactured from grade 316L stainless steel. Hose sleeves are available in stainless steel or high impact polymer.

Stainless Steel Hose Sleeve Elevated Temperature CIP & COP Suitable Excellent Durability Higher Pressure Ratings Chemically Resistant

Polymer Hose Sleeve Lightweight Mild Chemical Resistant Inexpensive Superior Impact Abrasion Resistant CIP Chemically Suitable

Accepted by - USDA Dairy, Egg, Meat & Poultry, Canada Agriculture Dairy, Meat & Poultry Reviewed by - Milk Safety Branch and in compliance with Grade "A" Pasteurized Milk Ordinance/FDA

PermaSeal® couplers provide the contamination free processing environment your products require in a sanitary hose and coupler assembly:

• Sanitary - full flow compression seal prevents bacteria build-up
• CIP' suitable - no disassembly for cleaning like clamped-in fittings
• Safe - superior coupling retention, no straps or bands to injure workers


With PermaSeal® couplers, you can combine the flexibility and handling ease of hose with the sanitary cleaning and maintenance ease of rigid stainless steel pipe!

That's because PermaSeal® couplers utilize a unique internal expansion method to create a uniform 360º fixed seal that eliminates the possibility of product wicking between the coupler and hose. The net result after fabrication is a full flow smooth bore connection without ledges or crevices that can accumulate bacteria or restrict flow!

PermaSeal® couplings are available in sizes 1½" through 6" in wide range of end styles. Stems are manufactured from grade 316L stainless steel. Hose sleeves are available in stainless steel or high impact polymer.

Stainless Steel Hose Sleeve

• Elevated Temperature
• CIP & COP Suitable
• Excellent Durability
• Higher Pressure Ratings
• Chemically Resistant

Polymer Hose Sleeve

• Lightweight
• Mild Chemical Resistant
• Inexpensive
• Superior Impact
• Abrasion Resistant
• CIP Chemically Suitable
• Assortment of Colors Available

 

Sentry® Softwall Discharge Hose


Tube: White FDA Butyl
Reinforcement: Two fabric spirals
Cover: Blue EPDM with yellow stripe
Temperature: -40º to +255ºF continuous (+250ºF intermittent)
Couplers: PermaSeal® permanently installed or ReSeal® reusable
 

Challenger™ FEP/Teflon® Suction
and Discharge Hose



Tube: White FDA FEP/Teflon®
Reinforcement: Two fabric spirals with dual wire helix and static wire
Cover: White EPDM with green stripe
Temperature: -40º to +350ºF.
Couplers: PermaSeal® permanently installed or ReSeal® reusable with stainless steel hose sleeves only

Additional Options:
Heavy Duty Construction
 

Protector™ Suction and
Discharge Hose



Tube: White FDA Butyl
Reinforcement: Two fabric spirals with helix wire
Cover: Gray or White EPDM with blue stripe
Temperature: -40º to +225ºF continuous (+250ºF intermittent)
Couplers: PermaSeal® permanently installed or ReSeal® reusable

Additional Options:
Heavy Duty Construction
 

Gladiator®
Crush-Resistant Hose



Tube: White FDA Butyl or Synthetic Polymer
Reinforcement: Multiple fabric spirals with monofilament helix
Cover: Red EPDM with yellow or white stripe
Temperature: -40º to +225ºF continuous (+250ºF intermittent)
Couplers: PermaSeal® permanently installed or ReSeal® reusable
 
 
 

 

SPD Series



Tube: FDA silicone (Platinum cured)
Color: Translucent White
Reinforcement: Single ply, polyester braid
Cover: FDA silicone
Temperature: -80°/+350°F
Couplers: ReSeal® reusable - PermaSeal® permanent
 

FPD Series



Tube: FDA silicone (Platinum cured)
Color: Translucent White
Reinforcement: Four ply, polyester braid
Cover: FDA silicone
Temperature: -80°/+350°F
Couplers: ReSeal® reusable - PermaSeal® permanent
 

FPW Series



Tube: FDA silicone (Platinum cured)
Color: Translucent White
Reinforcement: Four ply, polyester braid with stainless steel helix wire
Cover: FDA silicone
Temperature: -80°/+350°F
Couplers: ReSeal® reusable - PermaSeal® permanent
 
 

 

CSC Series



Tube: FDA PVC
Color: Transparent
Construction: Clear extrusion with clear helix rod reinforcement
Temperature: +20°/+140°F
Couplers: ReSeal® reusable
 

CSW Series



Tube: FDA PVC
Color: Transparent-White
Construction: Clear extrusion with white helix rod reinforcement
Temperature: +20°/+140°F
Couplers: ReSeal® reusable
 

CBT Series



Tube: FDA PVC
Color: Transparent
Construction: Clear extrusion with polyester textile inner braid reinforcement
Temperature: +20°/+140°F
Couplers: ReSeal® reusable or PermaSeal® permanent
 

CCT Series



Tube: FDA PVC
Color: Transparent
Construction: Clear extrusion no reinforcement
Temperature: +20°/+140°F
Couplers: ReSeal® reusable or PermaSeal® permanent
 

CSS Series



Tube: FDA PVC
Color: Transparent
Construction: Clear extrusion with steel wire helix rod reinforcement
Temperature: +20°/+140°F
Couplers: ReSeal® reusable or PermaSeal® permanent
 

Washdown Hose



Tube: Black Nitrile
Reinforcement: Two synthetic textile spiral cords
Cover: White Nitrile/PVC blend
Temperature: -20° to +200°F
Couplings: Shank style with strap or worm gear type clamp
 

Steam Series



Tube: Black EPDM
Reinforcement: Steel wire
Cover: Red EPDM with yellow stripe
Temperature: -20° to +400°F
Couplings: Interlocking clamp type
 

SaniGard® Hose Supports


 
 

 Assembly Part Number (Example)

 

Overall length tolerances for assemblies are:

1/4" on assemblies to 24" 1/2" on assemblies 25" to 60" 1% on assemblies over 60"


 

[Home] [Products] [Services] [Engineering & Installation] [About Us] [Email]

Copyright © 2002 Bykowski Equipment and Engineering Co., (BEECO)